Motorcycles Mounted USB Charger of 5V

Model NO.: Universal Power Source: Electric Display: Without Display Standard Input Voltage: 12V Output Voltage: 5+-0.2V Trademark: Client′s brand Origin: China Type: Motorcycles Mounted USB Charger Charger Cable Length: <4 Feet Color: Black Operating Voltage: 8-18V Output Current: <=1A Specification: International standard APPLICATIONS:
This model of USB chargers are specifically designed to be installed on motorcycles,scooters,or e-bikes for charging cell phones and other 5V electronic devices.

SPECIFICATIONS:

MODEL	STANDARD  INPUT VOLTAGE	OPERATING VOLTAGE	OUTPUT VOLTAGE	OUTPUT CURRENT
MJ-01B1	12V	8-18V	5±0.25V	≤1A
MJ-01B2	24V	18-28V	5±0.25V	≤1A
MJ-01B3	36V	30-40V	5±0.25V	≤1A
MJ-01B4	48V	40-52V	5±0.25V	≤1A
MJ-01B5	60V	52-66V	5±0.25V	≤1A

INSTALLATION:
Install the brackets to the bar or mount to a plastic part of the vehicle using two screws.
Plug the charger onto the bracket slot.

DIRECTION:
1.Unplug the rubber cover.
2.Connect the USB connector of your phone/device to the charer.
3.Switch on your motorcycle or bike to start charging.

WARNINGS:
1.The wires should not be installed bypassing the Ignition Switch;otherwise the vehicle may run out of battery under prolonged charging.
2.The input voltage shall be within the operating voltage range.When the vehicle is equipped with a magneto,the surge input peak-peak voltage shall be less than 50V.
3.Water or heavy rain shall not be poured directly into the USB socket.
4.Heavy impact force may damage the USB charger.Avoid to short the circult.
5.The illustrated product may not be exactly same as the packed charger due to update to the product.

Contact us if you need more details on USB Charger. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Motorcycle Mounted USB Charger、Charger. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Motorcycle Accessories > Other Motorcycle Accessories